18@Tradehub21, #01-128
Introduction:
In the construction industry, design and planning are critical and essential safety components. This is also in line with the focus and due emphasis on upstream risk control concept and requirement stipulated under the Workplace Safety and Health (WSH) Act and Code of Practice on WSH Risk Management, ISO 45001 Clause 8.1.2: Eliminating hazards and reducing Occupational Health & Safety (OH&S) risks and WSH 2028 Recommendation: Design for Safety (DfS).
By addressing potential risks at the design stage, these would allow for better upstream risk control measures to be adopted during the construction phase and allow for safer manner of executing example complex and high-risk construction work processes i.e. ERSS, falsework, steel structure, façade installation throughout the construction life-cycle and post-construction maintenance phase example maintenance of roof/façade.
Course Outline:
- Overview of Design for Safety (DfS) Process (Prevention through Design)
- Legislative Obligations: WSH (DfS) Regulations Requirements
- Design Review Process (GUIDE 1, 2, 3)
- DfS Good Practice Guide – Case Studies
Certification:
Upon completion of the course, a Certificate of Participation will be issued to the learners. 4 SDU points are awarded for WSHOs.
Concord Associates Pte Ltd reserves the right to cancel/postpone this course at short notice at its absolute discretion without assigning any reason for such cancellation/postponements.
Please note that there shall be no withdrawal/postponement/cancellation/refund given once the above applicant(s) is/are registered for this course.
With reference to the above, course fee will still be charged as per the fee stated.
All certificate(s)/ID Card(s) that has/have not been collected for more than 1 month from the commencement date shall be discarded.
