Events calendar

Perform Work At Height (Chinese) - 14 April 2025

18@Tradehub21, #01-128

Please note that there shall be no withdrawal/postponement/cancellation/refund given once the above applicant(s) is/are registered for this course.

With reference to the above, course fee will still be charged as per the fee stated.

All certificate(s)/ID Card(s) that has/have not been collected for more than 1 month from the commencement date shall be discarded.

WSQ Manage Hazardous Substances (also knowns as Hazardous Substances Management) [20 SDU] - 14, 15, 21, 22, 23 April 2025

18@Tradehub21, #01-128

5-Day Course:

First day: 14 April 2025 (Monday): 9am to 6pm

Second day: 15 April 2025 (Tuesday): 9am to 6pm

Third day: 21 April 2025 (Monday): 9am to 6pm

Fourth day: 22 April 2025 (Tuesday): 9am to 6pm

Fifth day: 23 April 2025 (Wednesday): 9am to 1pm

Exam: 23 April 2025 (Wednesday): 2pm to 6pm

Course Fee: $650.00/pax, excl. of 9% GST 

 

Course entry requirements

1) Literacy and Numeracy:

- WSQ Employability Skills Workplace Literacy and Numeracy Level 6; 

- Grade C6 in GCE ‘O’ Level for English and Mathematics

2) Science:

- Recognised Technical/Engineering Diploma or;

- Grade C6 in GCE ‘O’ Level Science (Chemistry)

3) Working Experience:

- Recommended to have 2 years working experience in any industry

- If the candidate has a recognised technical diploma, they are not expected to fulfil the
recommendation of 2 years working experience in any industry.

Please note that there shall be no withdrawal/postponement/cancellation/refund given once the above applicant(s) is/are registered for this course.

Concord Associates Pte Ltd reserves the right to cancel/postpone this course at short notice at its absolute discretion without assigning any reason for such cancellation/postponements.

Any certificate(s)/ID Card(s) that has/have not been collected for more than 1 month from the commencement date will be discarded.

(E-learning) Design for Safety (DfS) Appreciation - 17 April 2025

18@Tradehub21, #01-128

Introduction:

In the construction industry, design and planning are critical and essential safety components. This is also in line with the focus and due emphasis on upstream risk control concept and requirement stipulated under the Workplace Safety and Health (WSH) Act and Code of Practice on WSH Risk Management, ISO 45001 Clause 8.1.2: Eliminating hazards and reducing Occupational Health & Safety (OH&S) risks and WSH 2028 Recommendation: Design for Safety (DfS).

By addressing potential risks at the design stage, these would allow for better upstream risk control measures to be adopted during the construction phase and allow for safer manner of executing example complex and high-risk construction work processes i.e. ERSS, falsework, steel structure, façade installation throughout the construction life-cycle and post-construction maintenance phase example maintenance of roof/façade.

 

Course Outline:

- Overview of Design for Safety (DfS) Process (Prevention through Design)

- Legislative Obligations: WSH (DfS) Regulations Requirements

- Design Review Process (GUIDE 1, 2, 3)

- DfS Good Practice Guide – Case Studies

Certification:

Upon completion of the course, a Certificate of Participation will be issued to the learners. 4 SDU points are awarded for WSHOs.

 

Concord Associates Pte Ltd reserves the right to cancel/postpone this course at short notice at its absolute discretion without assigning any reason for such cancellation/postponements.

Please note that there shall be no withdrawal/postponement/cancellation/refund given once the above applicant(s) is/are registered for this course.

With reference to the above, course fee will still be charged as per the fee stated.

All certificate(s)/ID Card(s) that has/have not been collected for more than 1 month from the commencement date shall be discarded.

 

[RE-CERT] Metalworking Safety Orientation Course [MSOC] (Chinese) - 19 April 2025

18@Tradehub21, #01-128

Participants must have a valid MSOC pass before attending the re-certification.

NOTE: You are reminded to bring your NRIC/Work Permit/Passport/In-Principle Approval (IPA) Letter on the 1st day of the course for verification of participants.

Important MOM Guideline: Any participant who is absent from the above said Re-certification course without a valid reason WITH documentary proof (ie. Medical Certificate) provided to CAPL within 48 hours from the scheduled Re-Certification shall be deemed to have failed for the Re-Certification. The participant shall have to re-attend the FULL course under the WSQ scheme, which CAPL provides as well.

[RE-CERT] Metalworking Safety Orientation Course [MSOC] (Bengali) - 19 April 2025

18@Tradehub21, #01-128

Participants must have a valid MSOC pass before attending the re-certification.

NOTE: You are reminded to bring your NRIC/Work Permit/Passport/In-Principle Approval (IPA) Letter on the 1st day of the course for verification of participants.

Important MOM Guideline: Any participant who is absent from the above said Re-certification course without a valid reason WITH documentary proof (ie. Medical Certificate) provided to CAPL within 48 hours from the scheduled Re-Certification shall be deemed to have failed for the Re-Certification. The participant shall have to re-attend the FULL course under the WSQ scheme, which CAPL provides as well.